CarPlay Lab
Welcome to No.1 CarPlay Blog. We cover almost everything about Apple CarPlay here.

Kenwood Equalizer Settings: How to Optimize Your Sound System

by Mike
12 minutes read
A+A-
Reset

When it comes to setting up a Kenwood stereo system, there are a few key factors to consider. The type of music being played and the installed equipment will play a big role in determining the optimal settings. Luckily, there are several easy ways to get the best possible sound quality from your Kenwood stereo.

One of the simplest ways to optimize your Kenwood stereo is to adjust the music preset style. Popular options like Pop, Jazz, or Rap will automatically adjust the settings for optimal sound quality. Additionally, keeping the volume below 80% and consulting the manual for more specific adjustments can help to fine-tune the sound. In the following paragraphs, we will explore some additional tips and tricks for getting the most out of your Kenwood car stereo.

Typical Equalizer Settings for a Kenwood Car Stereo

Adjust sound settings – Kenwood Excelon

When it comes to adjusting the sound settings on a Kenwood Excelon car stereo, there are a few steps you should follow. First, you can adjust the sound arrival time delay by going to the setup menu and selecting the cabin option. From there, you can choose the type of car you have and hold the middle of the control knob to make the selection.

Next, you can set up the speaker by selecting the speaker option in the sound menu. Use the control knob to choose the location and size of the front speakers, such as under dash or on-dash, and hold the middle of the control knob to make the selection.

Finally, you can program the equalizer curve to your desired music type. Use the same process and concept as the previous steps to adjust the equalizer curve for your preferred music genre.

To enjoy the hands-free function of your Kenwood car stereo, you need to pair it with your mobile phone. Turn on the Bluetooth search mode of your phone and select the Kenwood when it appears on your phone search. Alternatively, you can connect using the AUX or USB cables if they are compatible with your Kenwood stereo.

By following these steps, you can adjust the sound settings on your Kenwood Excelon car stereo to your desired preferences.

How to Create the Best Settings for Kenwood Car Stereos

Kenwood stereo with the best equalizer settings

When it comes to creating the best settings for your Kenwood car stereo, it’s important to trust your ears. Tuning the stereo can make all the difference between good sound and just-okay quality. One way to improve the sound reproduction of your stereo is by configuring the equalizer. This will eliminate significant dips and peaks that can result in unpleasant sounds.

It’s important to note that Kenwood equalizers only have three frequency bands to work on, while advanced equalizers have over 13 bands. A 3-band equalizer has three distinct categories of mid, treble, and bass. The bass lies between 60 and 120 Hz, while the mid-ranges are between 400Hz and 500 Hz. The treble lies between 8,000Hz and 15,000Hz.

If your Kenwood stereo comes with advanced functions like auto equalization and digital sound processing, it’s best to consult the stereo manual when modifying the settings.

Here are the steps to follow when adjusting the settings of your Kenwood car stereo, based on the Kenwood owner’s manual for DPX models:

  1. Switch on the radio: While adjusting the settings of your Kenwood car stereo, make sure to park your car. Adjusting the settings while driving can be counterproductive or even dangerous.
  2. Choose a familiar song: Select one of your favorite songs with a sonic variety of diverse sounds, including high notes, mid-range sounds, and low notes. Ideally, choose a high-quality song from Apple, Spotify, or Amazon music.
  3. Adjust the fade control: Tune the fade control of the stereo to the point where the music only comes from the front speakers. Then, adjust the right-left balance until you get your desired sound. Note down this setting and proceed to complete the opposite utilizing the fade control. Again, adjust the right-left balance till you get your desired sound and note it down. Once you notice the balance settings for the back and front speakers are the same, you are good! If this is not the case, you will need to make a compromise between either setting. Look for a good balance for good sound from the rear and front speakers.
  4. Get the tone set: Take a moment and listen to the sound for a while. Observe if all the notes feature low, mid-range, and high. Observe if they are balanced as well. Before you make corrections, note what is missing from them. If the stereo has an equalizer, test the presets to confirm if they improve the sound. Improve the sound using treble, bass, and mid-range controls. Use diverse combinations of the equalizer presets, treble, and bass boost until you get the right sound. Ensure the high notes are not piercing, but they should be clear. Also, the mid-range notes ought to be complete, but they should not be too heavy.

By following these steps, you can create the best settings for your Kenwood car stereo and enjoy high-quality sound while driving.

How to Optimize Kenwood Equalizer Settings

At times, the default settings of your Kenwood equalizer may not deliver the best audio output. To get the best Kenwood equalizer settings, we recommend following these simple steps.

Use Good Quality Cables

Good quality cables help improve the sound of your stereo and reduce interference from the electrical system of the car. We recommend using Anker Powerline+ lightning cable, which is a well-trusted cable that can replace your existing cable.

Include an Amplifier

An amplifier helps improve the audio output of your stereo and channels it to the speaker. To get the best Kenwood equalizer settings, you need to adjust the gain control on the amplifier. Increase the receiver volume by three-quarters of the way and then turn up the gain until you notice distortions. Lower it slightly, and you will get the right setting.

Use Sound-Deadening Material

Mounting sound-deadening material to the door panel helps reduce any rattles or noise that could affect the speaker’s output. It also lowers the road noise of the car, ensuring that your sound system does not have to work at the highest volume.

Tune Your System

To maximize your speakers, ensure that your system is right on the sound system. Get it tuned to the type of music you listen to often. Begin with the lowest settings, increase it until you notice distortions, and then lower it slightly. Consult your manual to get a good guide for your system. Listening to the system will help you make the right tweaks that suit your needs.

Note: If you’re using wireless CarPlay, this is reported to cause audio quality issues.

Final Note

At the end of the day, finding the best sound settings for your Kenwood car stereo is a personal journey. While there are general guidelines to follow, such as adjusting the EQ to your music preferences and considering your environment, the ultimate decision lies with your ears. We recommend experimenting with different settings and trusting your judgment to find the perfect sound. If you’re interested in learning more, check out our article on the best car stereo sound settings for additional guidance.

Frequently Asked Questions

How can we adjust our Kenwood equalizer for optimal bass response?

To adjust the Kenwood equalizer for optimal bass response, we recommend starting with the bass frequencies and increasing the gain slightly. We suggest increasing the gain by a few decibels at a time until the desired bass response is achieved. However, it’s important to avoid overdoing it, as too much bass can lead to distortion and affect the overall sound quality.

What are the ideal 13-band equalizer settings for a Kenwood stereo?

The ideal 13-band equalizer settings for a Kenwood stereo depend on personal preference and the type of music being played. However, as a general guideline, we recommend setting the EQ flat and adjusting the bands according to the music being played. For example, for bass-heavy music, we suggest increasing the bass frequencies, while for vocals, we recommend increasing the mid-range frequencies.

What steps should we follow to set the EQ on our Kenwood device?

To set the EQ on a Kenwood device, we recommend the following steps:

  1. Press the “EQ” button on the stereo.
  2. Select the desired EQ preset or create a custom EQ setting.
  3. Adjust the EQ bands according to personal preference and the type of music being played.
  4. Save the custom EQ setting if desired.

How can we enhance vocal clarity using our Kenwood equalizer settings?

To enhance vocal clarity using Kenwood equalizer settings, we recommend increasing the mid-range frequencies. This will help bring out the vocals and make them more prominent in the mix. However, it’s important to avoid overdoing it, as too much mid-range can lead to a harsh, unpleasant sound.

What is the ‘stage EQ’ setting on Kenwood systems, and how is it used?

The ‘stage EQ’ setting on Kenwood systems is a feature that adjusts the soundstage to create a more immersive listening experience. This setting can be used to adjust the position of the soundstage, making it feel like the music is coming from different directions. We recommend experimenting with this setting to find the best soundstage for personal preference.

How do we find and apply the ‘Supreme’ setting on our Kenwood audio system?

To find and apply the ‘Supreme’ setting on a Kenwood audio system, we recommend the following steps:

  1. Press the “EQ” button on the stereo.
  2. Scroll through the EQ presets until the “Supreme” setting is selected.
  3. Press the “Enter” button to apply the setting.

The ‘Supreme’ setting is designed to enhance the overall sound quality and provide a more dynamic listening experience. However, it’s important to note that this setting may not be suitable for all types of music and personal preference may vary.

You may also like

Leave a Comment

carplay lab (200 × 100, 像素) (1)

Editors' Picks

Latest Posts

©2023 CarPlay Lab, A Tech Blog – All Right Reserved.